How to Use:
Hot Melt Construction:
Construction Process - Sub-grade treatment → Additional layer construction → Hot melt large area construction (laying the membrane) → Air expulsion and compaction → Water tightness test → Protective layer construction
Key Points of Construction -
1、Sub-grade treatment: Clean the surface first; the sub-grade should be solid, smooth, and clean; apply a primer evenly, ensuring full coverage without missing any spots; wait until the surface is dry before laying the membrane.
2、Additional layer construction: For areas such as corners, pipe roots, gutters, and expansion joints, additional layer treatment should be applied. Pre-cut pieces of membrane should be laid on the sub-grade according to the required dimensions and shapes.
3、 Large area construction: Unroll the membrane to release stress and lay it flat according to the chalk lines on the surface; use a hot melt tool to heat the underside of the membrane and the sub-grade until the Bitumen on the membrane surface shines and reaches a molten state; roll out the membrane while heating, then use a roller to press it down, ensuring a strong bond with the sub-grade.
4、 Lap joint treatment: The lap width of the membrane should be 100mm; the lap area should be sealed separately, also using the hot melt method. The lap joint should be filled with molten modified Bitumen, with a width of about 3-5mm and should be even and straight.
5、Water tightness test: Conduct the water tightness test according to the construction plan requirements.
6、 Protective layer construction: A protective layer should be set up on the outer surface of the waterproof layer according to relevant specifications or design requirements.
Hot Adhesive Construction:
Construction Process - Sub-grade treatment → Additional layer construction → Hot adhesive large area construction → Air expulsion and compaction → Water tightness test → Protective layer construction
Key Points of Construction -
1、 Sub-grade treatment: Clean the surface first; the subgrade should be solid, smooth, and clean.
2、 Additional layer construction: For areas such as corners, pipe roots, gutters, and expansion joints, additional layer treatment should be applied by pre-cutting the membrane to the appropriate size and shape.
3、 Large area construction: Use non-curing adhesive for hot adhesive waterproofing membrane composite construction, ensuring the non-curing coating thickness meets relevant specification requirements; roll out the waterproofing membrane while applying the non-curing adhesive.
4、 Lap joint treatment: The lap width of the membrane should be 100mm; the lap area should be sealed separately, using the hot adhesive method. The lap joint should be filled with an Bitumen strip.
5、 Water tightness test: Conduct the water tightness test according to the construction plan requirements.
6、 Protective layer construction: A protective layer should be set up on the outer surface of the waterproof layer according to relevant specifications or design requirements.
Precautions:
1、 Construction is strictly prohibited during rain, snow, or winds above level 5.
2、The ambient temperature during construction should not be below 0°C.
3、 The distance between the nozzle of the flame heater and the surface of the membrane should be appropriate; heating should be even across the width, with the membrane surface melting to a shiny black color, avoiding overheating the membrane.
4、 Safety protection facilities should be in place at the construction site, and fire-fighting equipment should be positioned according to regulations.
Product Application:
It can be widely used in various fields and types of waterproofing projects. And particularly suitable for the following types of projects: waterproofing roofs for industrial and civil buildings; waterproofing and moisture protection for underground engineering of industrial and civil buildings, as well as waterproofing for structures such as indoor swimming pools and fire protection pools; for exposed applications, the surface isolation material are used with opaque mineral granules.